Description
Premium Modified, Ported, and Calibrated Throttle Body.
Raptor MODEL/YEARS:
RAPTOR 6.2L (2010-2014)
Requires Adapter P/N: SE-FMCO-95-80 to fit on OEM Manifold
REQUIRES AFTERMARKET COLD AIR INTAKE DOES NOT FIT ON STOCK CAI.
Additional Fitment Information: An Aftermarket Cold Air Intake (CAI) or duct/coupler of approximately 4inch Dia. is recommended as the clamping surface is much larger at the TB inlet. It will not fit the stock/OEM duct on F-150. Mounts with connector towards the Passenger side.
The classic ported throttle body, 1350 SCFM @ 20” H2O at WOT.
FEATURES:
• Optimized Active Contours with sonic flow nozzles.
• Porting Taper and Upstream Bore with Velocity Stack.
• Greater Discharge Coefficient of Plate/Blade interface.
• 16 Ra Microinch, Diamond Polished Surface Finish.
• Self-Cleaning Throat/Flow Gap.
• Dimpled shaft trailing edge.
BENEFITS:
• Lower weight to power ratio at part throttle, for a more nimble/spirited driving experience.
• Linearization and smoothing of the curve for a more predictable response and crisper shifts.
• Immediate response right off idling while keeping idling function undisturbed (No Hesitation/Stumble).
• More air/power at every single throttle position after idle. Crucial for starting or expanding power gain modifications