Description
"Premium Modified, Ported, and Calibrated Throttle Body.
F150 MODEL/YEARS:
F150 5.0L (2015-2017)
Requires Adapter P/N: SE-FMCO-95-80 to fit on OEM Manifold
ALL STOCK GT350 INTAKE MANIFOLDS WILL REQUIRE AN ADAPTER - P/N: SE-FMCO-95-87GT350
Does not require an adapter if GT350 intake manifold is ported to at least 93mm at the inlet (gasket will be provided).
REQUIRES AFTERMARKET COLD AIR INTAKE DOES NOT FIT ON STOCK CAI.
Additional Fitment Information: An Aftermarket Cold Air Intake (CAI) or duct/coupler of approximately 4inch Dia. is recommended as the clamping surface is much larger at the TB inlet. It will not fit the stock/OEM duct on F-150. Mounts with connector towards the Passenger side.
The classic ported throttle body, 1350 SCFM @ 20” H2O at WOT.
FEATURES:
• Optimized Active Contours with sonic flow nozzles.
• Porting Taper and Upstream Bore with Velocity Stack.
• Greater Discharge Coefficient of Plate/Blade interface.
• 16 Ra Microinch, Diamond Polished Surface Finish.
• Self-Cleaning Throat/Flow Gap.
• Dimpled shaft trailing edge.
BENEFITS:
• Lower weight to power ratio at part throttle, for a more nimble/spirited driving experience.
• Linearization and smoothing of the curve for a more predictable response and crisper shifts.
• Immediate response right off idling while keeping idling function undisturbed (No Hesitation/Stumble).
• More air/power at every single throttle position after idle. Crucial for starting or expanding power gain modifications
"